 |
 |
 |
|
This is a complete kit including all
the required pre-cut pressure-rated hoses, clamps, screws, and even a common but special tool. All kits include a pre-terminated wiring and inertia
switch package. This is a COMPLETE "Plug-n-Play" package. There's nothing else to source, buy, or design.
Installation requires no holes in the floor, no wires to the back, no modifications to wiring, and no additional switches, or changes in engine oil plumbing. The kit and its sensors are installed 100% forward.
Every kit comes with fully illustrated, color instructions and a switch-mounting template.
Pump, filter, and isolator - this pump is almost inaudible in a quiet garage.
Dash mounted impact sensor and OE quality harness.
Kit includes comprehensive small parts - Every part needed for a compete installation
Pump mounts inside the left frame rail - up and out of harm's way.
.jpg)
Underdash impact/safety sensor plugs into existing fuse panel.
At the end of an hour or so, you'll have a very
professional installed appearance including plug-n-play wiring,
OPTIONS:
There are only two options:
1) Fuel pump bypass plate preserves 100% stock appearance.
This option adds $45. The bypass plate is optional because another approach
revises engine fuel lines using locally-obtained common parts. Instructions for
both methods are included.
2) Low oil-pressure cutoff and automatic prime functions
aren't strictly necessary but some builders and customers appreciate their
benefits. The RACERS LOP electronics package adds these features without any
need to run wires to the engine, add additional sensors, or revise engine oil
plumbing. RACERS LOP electronics package uses the existing factory oil pressure
sensor and wiring. RACERS LOP electronics package adds $30
|
|
|
 |
|
 |
|
.jpg){kind=logo}